Mortgage Rate Lock vs. Float-Down in Kennesaw, GA: What to Know

What Is the Difference Between a Rate Lock and a Float-Down Option?

A mortgage rate lock is your lender's written promise to hold your interest rate and points for a set window, usually 30, 45, or 60 days, while you move toward closing. A float-down option is an add-on some lenders offer that lets you capture a lower rate if rates drop after you lock, usually once, usually for a fee the lender sets itself. Neither is required by Georgia law. The one thing federal law does require is that your Loan Estimate state plainly whether your rate is locked and, if so, exactly when that lock expires.

TL;DR

  • Rate locks commonly run 30, 45, or 60 days, with longer options available, according to the Consumer Financial Protection Bureau.
  • Federal law (12 CFR 1026.37(a)(13)) requires your Loan Estimate to state whether your rate is locked and, if locked, the exact date and time the lock expires.
  • If your lock expires before you close, most lenders requote you at the current rate, and the Loan Estimate will not show what an extension costs. You have to ask your lender directly.
  • A float-down is typically usable once, and the fee, usually a percentage of your loan amount, is set by the lender, not by any federal or state rule.
  • New construction closings in Kennesaw and Acworth often run longer than a resale closing, which is why many builders' preferred lenders offer locks of 90 to 120 days or more instead of the standard 30 to 60.

Mortgage rates have been anything but settled through 2026. Freddie Mac's weekly Primary Mortgage Market Survey put the average 30-year fixed rate at 7.11% as of November 12, 2026, and that number moves from week to week. If you're under contract on a home in Kennesaw right now, the question isn't whether rates will move before your closing date. It's whether your rate lock will hold if they do, and whether a float-down is worth paying for if they don't.

How a Mortgage Rate Lock Actually Works

A rate lock is an agreement between you and your lender, not a government program. The Consumer Financial Protection Bureau describes it this way: a lock-in "means that your interest rate won't change between the offer and closing," as long as you close within the agreed time frame and your application doesn't change. Without a lock, your rate can move at any time between now and your closing table.

Lock periods are standardized by habit, not by law. The CFPB notes that rate locks are "typically available for 30, 45, or 60 days, and sometimes longer." A longer lock period generally comes with a higher rate or a separate fee, because the lender is carrying more interest rate risk the longer it holds your terms open.

This works the same way regardless of your loan type. Whether you're financing with a conventional loan, FHA, VA, or USDA, the lock itself is a private arrangement with your lender, and the federal disclosure rule that governs it applies the same way across all of them.

The length of lock you need should line up with your contract timeline, not just the lender's default offering. A Georgia purchase and sale contract gives you a due diligence period followed by a run to closing, and the total of those two windows is a reasonable starting point for how many days of rate protection you actually need. Lock too short and you risk needing an extension right as your closing date approaches. Lock longer than you need and you may pay for protection you never use. Ask your lender to walk through your specific contract dates before you decide on a lock period, rather than defaulting to whatever option they quote first.

Reading the "Rate Lock" Line on Your Loan Estimate

Every Loan Estimate you receive in Georgia, or anywhere in the country, has to answer one question under federal Regulation Z: is your rate locked right now, or not?

  • If it's locked, the form must state the exact date and time (including the time zone) the lock period ends.
  • If it's not locked, the form must say that your rate, points, and lender credits can still change, and give the date and time your estimated closing costs expire.

This single field tells you more than almost anything else on the page. If you're comparing Loan Estimates from two Kennesaw-area lenders and one shows a locked rate with a firm expiration date while the other shows an unlocked, floating rate, you are not comparing two offers on equal footing. Ask directly when each lender expects you to lock, and under what terms.

What Happens If Your Rate Lock Expires Before Closing

This is where most of the stress shows up. Closings get delayed for all kinds of reasons that have nothing to do with you: an appraisal gets rescheduled, a title issue needs clearing, the seller needs a few extra days. If your lock expires before you make it to the closing table, most lenders will requote your loan at the rate available that day. If rates have risen in the meantime, you absorb the difference.

Here's what that can look like on paper. Say you locked a $380,000 loan at 6.75% and your lock runs out. If the going rate has climbed to 7.25% by the time you close, your monthly principal and interest payment rises from about $2,464.67 to about $2,592.27, a difference of roughly $127.60 a month. Over 30 years, that's close to $45,935 in extra interest for what amounts to a timing problem. (This example is illustrative only, calculated for a hypothetical $380,000 loan, and your own numbers will depend on your loan amount, your rate, and your lender's specific policies.)

The CFPB is direct about one gap in disclosure here: your Loan Estimate will not show you what it costs to extend a rate lock. That's a question you have to ask your loan officer before you need the answer, not after.

The Float-Down Option: When It's Worth Paying For

A float-down is the reverse problem. If you lock your rate and the market then moves in your favor, a float-down lets you capture some of that improvement instead of being stuck at your original, higher locked rate.

A few things tend to hold true across lenders who offer this option, based on current lender guidance:

  • It's usually a one-time use. Once you float down, that option is typically spent.
  • The lender sets the threshold. Your rate often has to drop by a minimum amount, commonly in the neighborhood of half a percentage point, before you can exercise it. That threshold is the lender's own policy, not a federal or Georgia rule.
  • It isn't free. Lender guidance generally describes float-down fees in the range of roughly 0.25% to 1% of your loan amount, though some lenders build the cost into a slightly higher locked rate instead of charging it as a separate fee. These figures vary by lender, so confirm the exact cost and terms with your own loan officer before counting on this option.

To see whether paying for one makes sense, run the math rather than guessing. Say you locked a $380,000 loan at 7.0% and rates then drop to 6.5%. Floating down would lower your payment from about $2,528.15 to about $2,401.86, saving roughly $126.29 a month. If your lender charges a 0.5% float-down fee on that loan, that's $1,900 upfront, which you'd recover in about 15 months of lower payments. At a 0.25% fee, the breakeven drops to roughly 7.5 months. (Again, this is an illustrative example only. Your breakeven depends on your actual loan amount, your actual rate movement, and your lender's actual fee.)

If you expect to stay in the home and keep the loan well past your breakeven point, a float-down can be worth it. If the fee and the rate movement barely cover each other, it may not be.

New Construction in Kennesaw and Acworth: Why Lock Periods Run Longer

Resale closings in Cobb County typically move faster than new construction. A spec home that's already framed might close in 30 to 45 days. A home you're building from the ground up in a new Acworth subdivision could take several months longer, depending on the builder's schedule and how far along construction is when you sign.

That's why many builder-preferred lenders offer extended lock programs, often in the 90- to 120-day range or longer, built specifically for new construction timelines. A standard 30- or 60-day lock doesn't match how long it takes to get from contract to a certificate of occupancy. If you're financing new construction, ask your lender early whether their standard lock period actually covers your anticipated completion date, and what it costs to extend it if the build runs long.

The decision between locking early, locking late, or paying for a float-down isn't one you have to work out alone. It's exactly the kind of question worth walking through with someone who knows how Cobb County's resale and new-construction timelines typically play out.

Frequently Asked Questions

How long can I lock my mortgage rate when buying in Kennesaw?

Most lenders offer lock periods of 30, 45, or 60 days, according to the CFPB, with longer options available for an added cost. New construction loans often use extended locks of 90 to 120 days or more to match longer build timelines. Ask your lender which period fits your expected closing date before you lock.

What happens if my mortgage rate lock expires before closing?

Most lenders will requote your loan at the interest rate available that day, which can mean a higher payment if rates have risen. Your Loan Estimate will not show you the cost to extend a lock, so ask your loan officer about extension fees and options as soon as you know your closing might be delayed.

Does a float-down option cost extra?

Yes, in most cases. Lenders that offer a float-down generally charge a fee, often described in the range of roughly 0.25% to 1% of the loan amount, though some build the cost into the rate instead. The exact fee and the rate-drop threshold required to use it are set by your individual lender, so confirm both before you count on it.

Can I use a float-down more than once?

Typically no. Most lenders that offer this option limit you to a single use per loan. Once you float down to a lower rate, that option is generally considered spent for the remainder of your transaction.

Does my loan type, conventional, FHA, VA, or USDA, change how rate locks work?

Not in any meaningful way. The rate lock itself is an agreement with your lender, and the federal Loan Estimate disclosure rule requiring lenders to state whether your rate is locked applies the same way across loan types. If you're buying in Marietta and comparing loan programs, ask each lender about their specific lock periods and fees rather than assuming one loan type locks differently than another.

Whether you lock early, wait, or pay for a float-down comes down to your closing timeline, your risk tolerance, and the specific terms your lender is offering, none of which show up clearly until you ask the right questions. Schedule a consultation with me, Robert Masoudpour, Associate Broker in Kennesaw, Georgia, and I'll help you think through the timing alongside the rest of your purchase so your financing and your closing date are working together, not against each other. Schedule a 15-minute consultation

About Robert Masoudpour

With over 20 years of real estate experience, Robert Masoudpour is an Associate Broker and REALTOR® with Atlanta Communities - West Cobb. He serves clients throughout Marietta, Cobb County, and the broader North Atlanta metro area, focusing on strategic home selling, expert buyer representation, and relocation services. Backed by a trusted local network and deep market knowledge, Robert provides the honest, data-driven guidance buyers and sellers need to make confident real estate decisions. Learn more at masoudpour.com.

Next
Next

Non-Warrantable Condos in Kennesaw, GA: What Buyers Risk